Altoparlante a batteria 6.5" 100W con BT e USB - DAP D2612
The DAP PSS-106 Battery Speaker is a versatile mobile audio solution with a nice sounding 6.5" woofer and 1" tweeter. The design allows it to be used as a tilt-back floor monitor or as a small PA loudspeaker with a 35-mm pole mount. Two switches on the back and side automatically detect its application and adjust the frequency curve appropriately.
Equipped with a lightweight 2-channel class-D amplifier, the PSS-106 has inputs for mic, line, instrument, aux, and BT signals, and a built-in media player for SD cards and USB sticks. A dedicated wireless microphone, microphone receiver and beltpack are optional for providing an all-in-one audio solution.
The battery lasts up to 5 hours at full output and is fully rechargeable in 5 hours. This makes it a very convenient and trustable mobile solution for a wide variety of applications.
Please note that you can opt for a complete set including the PSS-106 battery speaker and the WM-10 wireless handheld microphone.
- 100 W full-range battery speaker with BT and MP3 function
- Lightweight Class-D amplifier
- Can be used as floor monitor, tilt back, or PA system
- 5 hours charging time and 5 hour battery life at maximum output
- Built-in 2-Ch amplifier with BT, USB, (mini)jack and XLR input
- Wireless microphone, microphone receiver, and beltpack optional
| Main Outputs | 1 |
|---|---|
| Main Output Connector | TRS balanced 6.3 mm |
| Low Driver Power | 90 W |
| High Driver Power | 10 W |
| Power Amplifier RMS Output | 100 W |
| Power Amplifier Peak Output | 160 W |
| Mono Inputs | 2 |
| Mono Input Connector | 3-pin XLR / TS unbalanced 6.3 mm |
| Balanced Mono Input Maximum Level | 1 dBu |
| Auxiliary Inputs | 1 |
| Auxiliary Input Connector | TRS balanced 3.5 mm |
| Unbalanced Auxiliary Input Maximum Level | 10 dBv |
| Supported Audio Files | MP3 |
| Media Input/Output | USB-A / SD Card |
| Amp Technology | Class D |
| Speaker System | Battery Operated |
| Maximum SPL at 1 m | 110 dB |
| Frequency Response Minimum | 70 Hz |
| Frequency Response Maximum | 20000 Hz |
| Frequency Response (-6 dB) Minimum | 70 Hz |
| Frequency Response (-6 dB) Maximum | 20000 Hz |
| Crossover Frequency (High) | 1900 Hz |
| Woofer Diameter | 6.5" |
| Woofer Voice Coil Diameter | 1.5" |
| Compression Driver Diameter | 1" |
| Compression Driver Magnet Type | Neodymium |
| Parametric Microphone Equalizer | 2 Bands |
| Microphone Input Equalizer Gain Range | 10 dB |
| Microphone Input Fixed Frequencies | 100, 10.000 Hz |
| Parametric Channel Equalizer | 2 Bands |
| Input Channel Equalizer Gain Range | 10 dB |
| Input Channel Fixed Frequencies | 100, 10.000 Hz |
| Built-in FX | Yes |
| FX Types | Reverb |
| BT | Yes |
| BT Audio Profile | A2DP |
| Battery Type | Lithium ion |
| Battery Voltage | 25.9 V |
| Capacity | 2.2 Ah |
| Battery Power | 56.54 Wh |
| Runtime @Full | 5 h |
| Runtime Average | 8 h |
| Charging Time | 5 h |
| Display | LED |
| Power Supply | 220-240 V AC 50 Hz |
| Power Consumption | 100 W |
| Fuse | 1.6 A |
| Power Connector In | IEC |
| Height (mm) | 323 mm |
| Width (mm) | 240 mm |
| Depth (mm) | 265 mm |
| Material | ABS |
| Weight | 5.9 kg |
| IP Rating | IP20 (indoor use only) |
| Colour | Black |
| Finish | Painted |
| VOX | Yes |
| Pole Mount | 35 mm |
| Cooling | Convection |
| Electronic Protection | Clip limiter / Overheat / Overload / Thermal |
| LED Indicators | Battery status / BT Pairing / Charging / Power / Protect / Signal |
| Speaker Grille Material | Steel |
| Speaker Handle Positions | Top |
| Castors | None |
| Maximum Ambient Temperature | 40 °C |
| Minimum Ambient Temperature | 5 °C |
| Included Cables | IEC cable |
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent