The DAP PDI-200 is a two-channel passive direct injection box. It converts a HI-Z signal into a LO-Z signal. You do not need a battery or phantom power for this direct box.
It is suitable for a wide array of applications, great for keyboard signals, acoustic & electric guitar signals and any other instrument signals that need to be plugged into a snake on stage. In addition, it has a 0/20/40 dB attenuation switch.
- 2x 6.3 mm TS Jack in, 2x balanced XLR out
- Prevents ground loops, hum and buzz
- Road proof housing with rubber feet
- Low distortion
- No power supply needed
- 0, 20 and 40 dB attenuation settings
| Mono Inputs | 2 |
|---|---|
| Mono Input Connector | TS unbalanced 6.3 mm |
| Mono Input Impedance | 50000 Ω |
| Main Outputs | 2 |
| Main Output Connector | 3-pin XLR / TS unbalanced 6.3 mm |
| Main Output Impedance | 500 Ω |
| THD Level % | < 0.003 % |
| Signal-to-noise Ratio | > 95 dB |
| Crosstalk | 96 dBu |
| Frequency Response Minimum | 30 Hz |
| Frequency Response Maximum | 50000 Hz |
| Phantom Power | No |
| Height (mm) | 55 mm |
| Width (mm) | 140 mm |
| Length (mm) | 110 mm |
| Housing | Aluminium |
| Weight | 1.1 kg |
| IP Rating | IP20 (indoor use only) |
| Colour | Black |
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
3 altri prodotti nella stessa categoria
Prodotti visti
Set 6x EventLITE 4/10 Q6 con valigetta e telecomando - Showtec 44068
2.591,62 €
Valutato su 5 stelle in base a
recensione/i
Commenti (0)
Non è stato possibile inviare il tuo giudizio sulla recensione
Segnala commento
Segnalazione inviata
Non è stato possibile inviare la tua segnalazione