The updated Antari Z-1500 III Fog Machine has a completely new user interface with two rotary encoders and integrated push buttons. Efficiency has also been improved, with the warm-up time reduced by 2 minutes compared to the previous model. This powerful fogger can turn 150 ml of fog fluid into a dense mist in just one minute at 100% output. The built-in liquid detector prevents the fogger from running out of fluid and avoids unpleasant consequences. Its tank holds up to 6 litres of fog fluid. The Z-1500 III Fog Machine can be controlled manually, via an internal timer, via the optional remote, and via DMX, and it is RDM-capable. With the optional Antari WTR-20 Wireless Remote you can increase or decrease the output and turn the output on or off.
- High output volume
- Approximately 10 minutes warm-up time
- 150 ml/min
- Large 6 L tank capacity
- Manual, DMX/RDM, timer and (optional) remote control
| Power Supply | 220-240 V AC 50 Hz |
|---|
| Power Consumption | 1500 W |
|---|
| Power Connector In | powerCON TRUE1 TOP |
|---|
| DMX Connector | XLR 5P In/Out |
|---|
| DMX Connector In | XLR 3P / XLR 5P |
|---|
| DMX Connector Out | XLR 3P / XLR 5P |
|---|
| Heater | 1500 W |
|---|
| Warm-up Time | 10 min |
|---|
| Output Direction | Forward |
|---|
| Housing | Metal |
|---|
| Colour | Black / Silver |
|---|
| Fluid Consumption | 150 ml/min |
|---|
| Fluid Tank Capacity | 6 L |
|---|
| Length (mm) | 674 mm |
|---|
| Height (mm) | 278 mm |
|---|
| Width (mm) | 235 mm |
|---|
| Weight | 13.3 kg |
|---|
| IP Rating | IP20 (indoor use only) |
|---|
| Control Mode | DMX / Manual / Timer |
|---|
| DMX Channels | 1 |
|---|
| Display | LCD |
|---|
| Maximum Ambient Temperature | 40 °C |
|---|
| Minimum Ambient Temperature | 0 °C |
|---|
| Included Cables | powerCON TRUE1 cable |
|---|
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent