Altoparlante passivo a gamma completa 15" 150W RMS 96dB - DAP D3626
The DAP NRG series consists of lightweight full-range loudspeakers with 8” to 15” woofers and subwoofers with 12” to 18” drivers, available in passive and <a target=”_blank” href=https://www.highlite.com/en/catalogsearch/result/?q=nrg&item_status=10%2C12%2C15%2C8&category_uid=MTUy>active</a> versions. The series is designed for mobile DJ applications or permanent installations in small to medium-sized venues. All NRG speakers use robust but lightweight plywood enclosures, double-angled pole mounts and M10 fly points on the full range speakers, M20 adapters on the subwoofers, a professional-grade wear-resistant polyurea coating and rugged 4-pole speaker connectors as well as terminal connectors to deliver great ease of use and sound quality at a very competitive price.
The DAP NRG-15 is a passive full-range loudspeaker rated at 550 watts peak (150 watts continuous RMS). It uses a 15” woofer and a 1” compression driver. With a sensitivity of 96 dB/W/m, the NRG-15 comfortably plays up to 118 dB with peaks of up to 130 dB. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The woofer has a low cut-off point of 50 Hertz (-6 dB).
The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. It uses 4-pole speaker in and thru connectors and offers an additional 4-pin terminal connector, which is especially useful for permanent installation applications. To get the most out of the NRG-15, we recommend using a 4th order high-pass filter at 50 Hertz and adding an NRG series subwoofer.
- 150 W RMS, 550 W peak, max SPL of 118 dB at 1 m
- Speaker sensitivity 96 dB/W at 1 m
- Full range (50 - 20,000 Hz)
- Dual-angle speaker flange (0° and 5°)
- Lightweight (20.2 kg)
| RMS Input Power | 150 W |
|---|---|
| Peak Input Power | 550 W |
| Passive Input Connection | Speaker Connector 4 pole / Terminal |
| Passive Output Connector | Speaker Connector 4 pole |
| Speaker System | 2-way |
| Speaker Sensitivity (1 W/1 m) | 96 dB |
| Speaker Impedance | 8 Ω |
| Maximum SPL at 1 m | 118 dB |
| Frequency Response (-6 dB) Minimum | 50 Hz |
| Frequency Response (-6 dB) Maximum | 20000 Hz |
| Woofer Diameter | 15" |
| Woofer Voice Coil Diameter | 2" |
| Woofer Magnet Type | Ferrite |
| Compression Driver Diameter | 1" |
| Compression Driver Voice Coil | 1.4" |
| Compression Driver Magnet Type | Ferrite |
| Dispersion Angle (Horizontal) | 90° |
| Dispersion Angle (Vertical) | 60° |
| Height (mm) | 680 mm |
| Width (mm) | 440 mm |
| Depth (mm) | 460 mm |
| Material | Plywood |
| Weight | 20.2 kg |
| IP Rating | IP20 (indoor use only) |
| Colour | Black |
| Finish | Painted |
| Speaker Adapter Diameter | 35 mm |
| Useable as Monitor/Wedge | No |
| Speaker Grille Material | Steel |
| Speaker Handle Positions | Left side / Right side |
| Rigging Eye Thread | M10 |
| Maximum Ambient Temperature | 40 °C |
| Minimum Ambient Temperature | 0 °C |
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent