The DAP DCP-26 MKII is a 6-channel digital crossover, suitable for your 6-part sub/top speaker combination. It is equipped with a variety of functions, such as a 5-band equalizer, volume control, X-over, reverse, limiter and delay. This allows you to achieve optimal sound quality at any location.
In one view you have insight into all the necessary information thanks to audio signal indicators for inputs and outputs in combination with an LCD display. The DCP-26 MKII is suitable for PA as well as line arrays, audio installations and sound distribution networks.
Using the DAP DSP Control software, available for Windows and MacOS, you can use advanced settings to fine-tune and protect your sound system. You can also easily save or recall presets. The DCP-26 MKII can be connected to your PC/laptop using a USB-A to USB-B cable.
Not familiar with speaker processors? Our DAP technicians will help you get started with the basic settings. Ask your supplier or contact person for help and you will receive the right guidance.
- 48 kHz, 64 Bits Sample rate
- 5 parametric EQs each in- and output
- Limiter, delay, reverse and volume control
- USB interface and user-friendly software included
- 50 User Presets
| Mono Inputs | 2 |
|---|
| Mono Input Connector | 3-pin XLR |
|---|
| Mono Input Headroom | 22 dB |
|---|
| Mono Input Gain Range | 12 dB |
|---|
| Balanced Mono Input Maximum Level | 22 dBu |
|---|
| Mono Input Impedance | 10000 Ω |
|---|
| Main Outputs | 6 |
|---|
| Main Output Connector | 3-pin XLR |
|---|
| Main Output Headroom | 9 dB |
|---|
| Main Output Maximum Level | 0 dBu |
|---|
| THD Level % | < 0.01 % |
|---|
| Signal-to-noise Ratio | > 90 dB |
|---|
| Audio Latency | 1.27 ms |
|---|
| DSP Processor Bitrate | 64-bit |
|---|
| Frequency Response Minimum | 20 Hz |
|---|
| Frequency Response Maximum | 20000 Hz |
|---|
| Supported Operating Systems | Windows |
|---|
| DSP | Yes |
|---|
| Equalizer Gain Range | 12 dB |
|---|
| Parametric Input Equalizer | 5 Bands |
|---|
| Parametric Output Equalizer | 5 Bands |
|---|
| Input Equalizer Types | Allpass / Bell / High Shelf / Low Shelf / Notch |
|---|
| Output Equalizer Types | High Shelf 6 / High Shelf 12 / Low Shelf 6 / Low Shelf 12 |
|---|
| Crossover Filter Types | Bessel / Butterworth / Linkwitz Riley |
|---|
| Crossover Slopes | 6 / 12 / 24 / 48 dB |
|---|
| Dynamics Processing | Limiter |
|---|
| Phase Reverse | Yes |
|---|
| Limiter Threshold Minimum | -20 dB |
|---|
| Limiter Threshold Maximum | 20 dB |
|---|
| Limiter Release Time Minimum | 1 ms |
|---|
| Limiter Release Time Maximum | 100 ms |
|---|
| Output Delay (Max.) | 8 ms |
|---|
| User Presets | Yes |
|---|
| User Presets Capacity | 50 |
|---|
| Control Mode | Manual / PC Software |
|---|
| Display | LCD |
|---|
| Power Supply | 220-240 V AC 50 Hz |
|---|
| Output voltage | 6 V DC |
|---|
| SMPS | Yes |
|---|
| Power Consumption | 4 W |
|---|
| Power Connector In | Low Voltage DC plug |
|---|
| Data Connector In | USB B |
|---|
| Cable Length | 1.5 m |
|---|
| Height (mm) | 44 mm |
|---|
| Width (mm) | 483 mm |
|---|
| Length (mm) | 155 mm |
|---|
| Installation Depth (Excl. Connector) | 155 mm |
|---|
| Flightcase Size | 19" |
|---|
| Rack Units | 1 U |
|---|
| LED Indicators | Clip / Input level / Operation mode / Output level / Signal |
|---|
| Housing | Metal |
|---|
| Colour | Black |
|---|
| Weight | 1.9 kg |
|---|
| IP Rating | IP20 (indoor use only) |
|---|
| Included Cables | USB-A - USB-B cable |
|---|
| Included Accessories | Adapter / Software |
|---|
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent