The DAP PDI-200 is a two-channel passive direct injection box. It converts a HI-Z signal into a LO-Z signal. You do not need a battery or phantom power for this direct box.
It is suitable for a wide array of applications, great for keyboard signals, acoustic & electric guitar signals and any other instrument signals that need to be plugged into a snake on stage. In addition, it has a 0/20/40 dB attenuation switch.
- 2x 6.3 mm TS Jack in, 2x balanced XLR out
- Prevents ground loops, hum and buzz
- Road proof housing with rubber feet
- Low distortion
- No power supply needed
- 0, 20 and 40 dB attenuation settings
| Mono Inputs | 2 |
|---|---|
| Mono Input Connector | TS unbalanced 6.3 mm |
| Mono Input Impedance | 50000 Ω |
| Main Outputs | 2 |
| Main Output Connector | 3-pin XLR / TS unbalanced 6.3 mm |
| Main Output Impedance | 500 Ω |
| THD Level % | < 0.003 % |
| Signal-to-noise Ratio | > 95 dB |
| Crosstalk | 96 dBu |
| Frequency Response Minimum | 30 Hz |
| Frequency Response Maximum | 50000 Hz |
| Phantom Power | No |
| Height (mm) | 55 mm |
| Width (mm) | 140 mm |
| Length (mm) | 110 mm |
| Housing | Aluminium |
| Weight | 1.1 kg |
| IP Rating | IP20 (indoor use only) |
| Colour | Black |
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent