The DAP EDGE series offers wireless microphones and beltpacks for recording or amplifying vocals and instruments. It is a reliable, yet affordable solution with simple operation for creating a clear and pure sound without interference. Transferring frequencies between receiver and transmitter are done automatically due to the infrared sensors. In addition, you can use up to 8 wireless microphones/beltpacks simultaneously. This is usually sufficient for bands and other artists.
Microphone/beltpack recognition is easy due to the included colour coded stickers. Additional accessories are available to extend the reach or to make the handheld microphones compatible with wireless Shure cartridges. You can order each item separately or opt for a complete microphone or beltpack set with condenser headset, 19" installation rack, adapter and windscreen.
Interested in our DAP Edge series? Contact us now for free advice and get an offer you can't refuse or check out our product pages for more information.
The DAP EDGE EBS-1 is a wireless belt pack microphone system for easy operation and a reliable signal without interference. It is a set consisting of a microphone receiver, belt pack transmitter (sender) and a high quality cardioid condenser headset for a clear and pure sound.
The EDGE EBS-1 has a practical colour coding solution. This enables you to instantly recognise the dedicated receiver for your belt pack when using up to 8 wireless microphone belt packs sets at the same time. The receiver can quickly scan the frequency range and find an unused frequency to avoid signal distortion for the best reception possible. Another great feature is the infrared sensor on the microphone belt pack and receiver. It'll allow you to easily set all important settings on the receiver and everything is transferred automatically as soon as you hold the microphone in front of it.
This wireless microphone set comes with many accessories to complete your installation, such as a 19" rack installation kit, adapter, RF antenna and a windscreen.
- UHF true-diversity receiver with full colour LCD
- Band Scan function for interference elimination
- Belt-pack transmitter with OLED display
- High-quality cardioid condenser headset
- Incl. 19" rack instal kit, adapter, antenna & wind screen
| Wireless Audio Frequency Start | 610 MHz |
|---|
| Wireless Audio Frequency End | 670 MHz |
|---|
| RF Frequency Stability | 0.0015 % |
|---|
| RF Power | 30 mW |
|---|
| Frequency Deviation | 75 ± kHz |
|---|
| Spurious Rejection | 50 <- dBC |
|---|
| RF Bandwidth | 60 MHz |
|---|
| THD Level % | < 1.0 % |
|---|
| Signal-to-noise Ratio | > 100 dB |
|---|
| Microphone Sensitivity | 1.9 mV |
|---|
| Max. SPL | 133 dB |
|---|
| Frequency Response Minimum | 50 Hz |
|---|
| Frequency Response Maximum | 19000 Hz |
|---|
| Phantom Power | 5 V |
|---|
| Gain Range (Transmitter) | 30 dB |
|---|
| Mono Input Connector | 4-pin mini XLR |
|---|
| Mono Inputs | 1 |
|---|
| RF Antenna Inputs | 2 |
|---|
| RF Antenna Input Connection | BNC |
|---|
| RF Antenna Input Impedance | 50 Ω |
|---|
| Microphone Output | 1 |
|---|
| Microphone Output Connection | 3-pin XLR / TS unbalanced 6.3 mm |
|---|
| Balanced Audio Output Maximum Level | 48 dBu |
|---|
| Receiver Output Impedance | 50 Ω |
|---|
| RF Receiver Antenna Output Voltage | 15 V |
|---|
| RF Receiver Antenna Output Current | 150 mA |
|---|
| Battery Type | AA |
|---|
| Battery Voltage | 1.5 V |
|---|
| Runtime Average | 10 h |
|---|
| Display | OLED |
|---|
| Transmitter Type | Beltpack |
|---|
| Receiver Type | True diversity |
|---|
| Power Supply | 100-240 V AC 50/60 Hz |
|---|
| Output voltage | 15 V DC |
|---|
| SMPS | Yes |
|---|
| Power Consumption | 5.3 W |
|---|
| Power Connector In | Low Voltage DC plug |
|---|
| Power Connector Out | Low Voltage DC Socket |
|---|
| Height (mm) | 44.5 mm |
|---|
| Maximum Height (mm) | 250 mm |
|---|
| Width (mm) | 205 mm |
|---|
| Depth (mm) | 225 mm |
|---|
| Transmitter Height (mm) | 22 mm |
|---|
| Transmitter Width (mm) | 65 mm |
|---|
| Transmitter Length (mm) | 90 mm |
|---|
| Installation Depth (Excl. Connector) | 250 mm |
|---|
| Flightcase Size | 19" |
|---|
| Rack Units | 1 U |
|---|
| Housing | Aluminium / Metal |
|---|
| Weight | 1.24 kg |
|---|
| Transmitter Weight | 0.11 kg |
|---|
| Colour | Black |
|---|
| Maximum Ambient Temperature | 50 °C |
|---|
| Minimum Ambient Temperature | 0 °C |
|---|
| Included Cables | TRS unbalanced 6.3 mm - TRS unbalanced 6.3 mm |
|---|
| Included Accessories | 19'' Rack installation kit / Adapter / Headset / RF antenna / Screws / Windscreen |
|---|
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent