Set microfono wireless 2 canali 606-630 MHz con 2 microfoni a mano - DAP D1464
If you would need 2 wireless microphones, and have just one channel available on your inputs, the DAP COM-42 is the ideal wireless microphone set for you. The wireless receiver has a balanced XLR output for each wireless transmitter, and also an unbalanced MIX output on a 6.3 mm Jack plug. By using the volume buttons on the front of the receiver, it is easy to setup the desired balance between 2 transmitters. The COM-42 has 99 frequency present which can be set easily through infrared synchronisation technique. A clear LCD display shows the signal strength, audio level and carrier frequency of each channel. A COM-42 wireless microphone set contains a receiver and 2 metal handheld transmitters. Also it is possible to use an optional beltpack transmitter.
- Compact 2-channel receiver
- Infra-red synchronisation technique
- 2x Metal handheld microphone
- Colour coding stickers included
| Wireless Microphone Frequency Start | 606 MHz |
|---|---|
| Wireless Microphone Frequency End | 630 MHz |
| RF Frequency Stability | 0.005 % |
| RF Power | 10 mW |
| Frequency Deviation | 225 ± kHz |
| Spurious Rejection | 50 <- dBC |
| RF Bandwidth | 24 MHz |
| THD Level % | < 1.0 % |
| Signal-to-noise Ratio | > 100 dB |
| Microphone Type | Dynamic moving coil |
| Microphone Sensitivity | 2.2 mV |
| Dynamic Range | 100 dB |
| Polar Pattern | Cardioid |
| Max. SPL | 135 dB |
| Frequency Response Minimum | 50 Hz |
| Frequency Response Maximum | 16000 Hz |
| Microphone On/Off Switch | Yes |
| RF Antenna Inputs | 2 |
| RF Antenna Input Connection | BNC |
| Microphone Output | 1 |
| Microphone Output Connection | 3-pin XLR / TS unbalanced 6.3 mm |
| Battery Type | AA |
| Battery Voltage | 1.5 V |
| Runtime Average | 6 h |
| Channels | 100 |
| Display | LCD |
| Transmitter Type | Handheld |
| Receiver Type | True diversity |
| LED Indicators | Battery status / Power |
| Power Supply | 100-240 V AC 50/60 Hz |
| Output voltage | 15 V DC |
| Power Connector In | Low Voltage DC plug |
| Height (mm) | 45 mm |
| Width (mm) | 210 mm |
| Length (mm) | 210 mm |
| Transmitter Length (mm) | 260 mm |
| Diameter | 50 mm |
| Installation Depth (Excl. Connector) | 210 mm |
| Flightcase Size | 19" |
| Rack Units | 1 U |
| Housing | Aluminium |
| Weight | 1 kg |
| Transmitter Weight | 0.27 kg |
| Colour | Black |
| Included Accessories | Adapter / Colour-coded stickers / Screwdriver |
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent