Diffusore full-range alimentato a batteria NRG-12 Mobile - DAP D3650
The DAP NRG series consists of lightweight full-range loudspeakers with 8” to 15” woofers and subwoofers with 12” to 18” drivers, available in <a target=”_blank” href=https://www.highlite.com/en/catalogsearch/result/?q=nrg&item_status=10%2C12%2C15%2C8&category_uid=MTU0>passive</a> and active versions. The series is designed for mobile DJ applications or permanent installations in small to medium-sized venues. All NRG speakers use robust but lightweight plywood enclosures, double-angled pole mounts and M10 fly points on the full range speakers, M20 adapters on the subwoofers, a professional-grade wear-resistant polyurea coating and rugged connectors to deliver great sound quality at a very competitive price.
The active range of NRG series is surprisingly lightweight, as the amplifiers use modern class D technology and switched-mode power supplies. The built-in Bluetooth 5.0 receiver offers TWS (True Wireless Stereo) to quickly set up a wireless stereo system. The crossover filters are implemented in the internal DSP and include presets for optimised frequency and phase-optimised for top/sub combinations with all NRG models. The best way to get a great sound and high output is to use a top and a sub from the NRG range!
The DAP NRG-12 Mobile is a full-range, battery-powered speaker with BT 5.0. It has a peak power output of 200 watts with 120 watts of continuous RMS power. With the separately available standard 12 V battery, the NRG-12 Mobile has a run time of approximately 20 hours at an average volume, more than enough to get through any occasion. The built-in amplifier has a 3-pin XLR/jack combo microphone input and a mini-jack line input that each have their own volume controls. There's also a separate volume control for the BT connection and the speaker offers True Wireless Stereo when connected to a second speaker. When it comes to DSP settings, the NRG-12 Mobile makes use of a contour/flat switch, providing customised control over the sound. LEDs on the back of the speaker show different statuses, including when the limiter kicks in and how much power the battery has left.
- 120 W RMS, 200 W peak, max SPL of 113 dB at 1 m
- 60 - 20,000 Hz frequency range
- Dedicated mic and line inputs
- BT 5.0 with True Wireless Stereo
- Internal DSP
| Power Amplifier RMS Output | 120 W |
|---|---|
| Power Amplifier Peak Output | 200 W |
| Mono Inputs | 1 |
| Mono Input Connector | 3-pin XLR |
| Auxiliary Inputs | 1 |
| Auxiliary Input Connector | TS unbalanced 3.5 mm |
| THD Level % | < 0.5 % |
| Speaker Sensitivity (1 W/1 m) | 95 dB |
| Maximum SPL at 1 m | 113 dB |
| Frequency Response Minimum | 60 Hz |
| Frequency Response Maximum | 20000 Hz |
| Woofer Diameter | 12" |
| Woofer Voice Coil Diameter | 2" |
| Woofer Magnet Type | Ferrite |
| Compression Driver Diameter | 1" |
| Compression Driver Voice Coil | 1.4" |
| Compression Driver Magnet Type | Ferrite |
| Dispersion Angle (Horizontal) | 90° |
| Dispersion Angle (Vertical) | 60° |
| BT | Yes |
| Battery Type | Lead-Acid (not included) |
| Battery Voltage | 12 V |
| Capacity | 10 Ah |
| Runtime @Full | 8 h |
| Runtime Average | 20 h |
| Charging Time | 10 h |
| Power Supply | 100-240 V AC 50/60 Hz |
| Power Consumption | 120 W |
| Power Connector In | IEC |
| Height (mm) | 575 mm |
| Width (mm) | 345 mm |
| Depth (mm) | 360 mm |
| Material | Plywood |
| Weight | 21 kg |
| IP Rating | IP20 (indoor use only) |
| Colour | Black |
| Retractable Handle | No |
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Commenti (0)
Non è stato possibile inviare il tuo giudizio sulla recensione
Segnala commento
Segnalazione inviata
Non è stato possibile inviare la tua segnalazione